
Re: 1.25 compile related patches
Hi cbagwell
I also have warning message about extraneous bytes from my Wanscam cameras.
I have used your IPCAM command script. Read about it in the wiki.
http://www.zoneminder.com/wiki/index.php/WanscamI have found some things that you might want to change in your wiki:
---
Control Device: user=admin&pwd=pass
Control Address: x.x.x.x:yy
Control Device: Empty
Control Address: admin:pass@x.x.x.x:yy (user:password@IP:Port)
This change gets rid of error message "user=admin&pwd=pass no such file or directory"
---
White
Can White Balance: Tick
Can White Balance Absolute: Tick
Min White Bal. Range: 1
Max White Bal. Range: 255
Min White Bal. Step: 1
Max White Bal. Step: 255
Iris
Can Iris: Tick
Can Iris Absolute: Tick
Min Iris Range: 1
Max Iris Range: 6
Min Iris Step: 1
Max Iris Step: 6
White
Can White Balance: Tick
Can White Balance Absolute: Tick
Min White Bal. Range: 1
Max White Bal. Range: 255
Iris
Can Iris: Tick
Can Iris Absolute: Tick
Min Iris Range: 1
Max Iris Range: 6
Accordingto Main Documentation step should be used together with relative comands.
---
/branderco