Hello.

Both working with the following parameters:

Linksys WVC54GCA:

Remote Host Name: your.username:your.password@your.ip.address
Remote Host Port: your.port (e.g. 80)
Remote Host Path: /img/mjpeg.cgi
Capture Width: your.width (e.g. 640)
Capture Height: your.height (e.g. 480)
[...]

Trendnet TV-IP110W:

The same except for this field:

Remote Host Path: /cgi/mjpg/mjpg.cgi

Cheers,

tried this can't seem to get it to work....

I have a trendnet mirco 110

I only said it worked for me with the aforesaid models. Dunno about the "mirco" (micro?) piece you mentioned...Still, as far as Trendnet goes I read here somewhere about different Trendnet models that worked with the "/cgi/mjpg/mjpg.cgi" path.

Cheers,

I have the trendnet tv-ip110w i can't get it to work. I know the following two links are vaild for the camera. I just get a blank image place holder.

/cgi/mjpg/mjpg.cgi

/cgi/jpg/image.cgi

If anyone would like to try it i have it up at

http://admin:admin@66.157.34.232:8888

I'm using v1.24.2

Both settings either snapshot or mjpeg work fine for me here with the following settings:

Must be something wrong with my install. I'm going to reinstall and try it again. Thanks for your help!