I'm pretty new to ZoneMinder, but I've been able to get it running with a TV-IP410 and I did get control to work, so I'm looking pretty good so far.
However, I'd like to simply record the video from the camera full time, and store the video somewhere besides the default location (which I'm not actually sure where that is... The documentation doesn't really seem to touch on this very much.)
I am not interested in using motion triggers for this camera. I just want to record video 24 hours. I'd like to break the video up into 1 hour blocks if possible.
So, I guess I'm not sure how to do this, if it's even possible? I've got to think you can just record 24 hours a day. And where do I tell ZoneMinder where to store the video?
Thanks in advance.
Mon Aug 24, 2009 6:52 am
Joined: Thu Aug 20, 2009 1:40 pm Posts: 23
I have a similar issue. I have a second hard drive in my machine (DEV/SDA2) that I would like to dedicate for recordings, but I am not sure as to where to go to configure ZM to record to this HD? I looked in the options section of ZM but no luck.
CBREAKER, I have the TV-IP410 camera and wanted to ask where you put your control module script to get the pan/tilt to work? Also if you have the script you used that would be great too. I noticed someone else who made a how-to script for the Airlink camera which is supposed to work the same as the ip410.
Users browsing this forum: No registered users and 2 guests
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum