View unanswered posts | View active topics It is currently Thu Sep 03, 2015 6:09 pm

Reply to topic  [ 7 posts ] 
Aviosys IP Kamera 9060 Working 
Author Message

Joined: Sat Aug 19, 2006 12:11 am
Posts: 13
Location: South Africa
Post Aviosys IP Kamera 9060 Working

I had been playing around with Zone Minder for a few days now, but unfortunately the only camera hardware I currently have is the Aviosys IP Kamera 9060.

I got it to work with the Perl script that captures jpeg images, and then letting zone minder open it from a local path. Unfortunately this was a little slow, and also took up quite a lot of my (slow pc's) CPU.

At last, I found a way to get the streaming output of the camera into ZoneMinder:

Download the relay file for the NC 800 here: ... NC800Relay
(This works fine with the 9060 too).

At a linux prompt, type:

cd /usr/src
mkdir relay
cd relay

wget ... 800.tar.gz
untar -zxvf relay-nc800.tar.gz
make all

The executable will be built now. If you're running a linux distro (like the CTU FC-3 one), where you can't build this file, build it on another pc, or reply to this post, and I'll post the one already compiled for i386.

Now, all you need to do, is run:

./relay-nc800 -url= -port=15000

Where is the IP and port of your IP Kamera. (Normally the port is 80).

You can leave the value of 15000 as is for now.

Now go into Zone Minder's config, and add a remote device:

Remote Host Name:
Remote Host Port: 15000
Remote Host Path:
(leave remote host path blank).

That's it!!

If you'd like the relay program to auto start when you're starting your pc, put this command in your /etc/rc.local file

nohup /usr/src/relay-nc800 -url= -port=15000 &

Hope this works as beautifully for you guys as it did for me.


Sat Aug 19, 2006 10:48 am
Site Admin
User avatar

Joined: Wed Jul 09, 2003 3:07 pm
Posts: 5221
Location: Bristol, UK
Thanks for posting this. I'm sure other users will find it useful.


Sun Aug 20, 2006 9:31 pm

Joined: Sat Sep 30, 2006 3:41 pm
Posts: 6
This works perfectly Solar!

Thanks very much!

Thu Mar 08, 2007 8:44 am

Joined: Mon Aug 28, 2006 2:38 am
Posts: 17
Post perfect
thanks for the instructions finally got it working. only problem i have encountered is that sometimes the camera loses its connection. in terminal i get the error "connection reset by peer" any ideas how i can stop this?


Wed Apr 25, 2007 10:12 pm

Joined: Mon Jun 30, 2008 12:59 pm
Posts: 2
Post Authentication
I can't connect to my webcam
Howto authenticate ?

Mon Jun 30, 2008 1:02 pm

Joined: Mon Jun 30, 2008 12:59 pm
Posts: 2
I have done a test with a free webcam (Aviosys 9060SL):
sudo /usr/src/relay/relay-nc800 -url= -port=15000 -auth=guest:guest -debug

It works !

But whith mine it doesn't. It's a 9060-O. What's the difference with the 9060SL ?

Mon Jun 30, 2008 1:44 pm

Joined: Sun Feb 14, 2010 11:26 pm
Posts: 2
I have the Aviosys 9060A-MP camera.. When I execute the above Perl script here in Ubuntu, it connects fine, but has an error saying bad header image. Is the script for a slightly different version of the camera, or do I need to modify some parameters?

I have also worked with the NC800 relay script solution, but that doesn't work either - I just get a blank black screen in the ZM monitor view.

Any ideas?

Mon Feb 15, 2010 12:09 am
Display posts from previous:  Sort by  
Reply to topic   [ 7 posts ] 

Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group