Zonet / FitiVision / Trendnet IP Cameras

[RoundSparrow]

Zonet zvc7610 or zvc7610w - I figured out this with a FitiVision OEM camera. Extensive google searching landed me some useful info!

use: (snapshot)
http://x.x.x.x/cgi/jpg/image.cgi
or (motion jpeg)
http://x.x.x.x/cgi/mjpg/mjpg.cgi

source of info here:
http://www.synology.com/enu/forum/viewtopic.php?f=82&t=6849


BTW, Newegg and eWiz has these at great prices ($80) for the Ethernet units, rebate currently available too.

[itsthemedication]

I'm trying to get a Zonet 7610 camera to work with Zoneminder 1.22. Can you give a bit more info?

I've tried (these are entries in the source tab of the camera setup - name/path/pixels):

-------------------------------------
admin:admin@192.168.0.11
with
/cgi/mjpg/mjpg.cgi --> also tried /cgi/mjpg/mjpeg.cgi because reference page you point to says that
at
640
480
------------------------------------
admin:admin@192.168.0.11
with
/cgi/jpg/image.cgi
at
640
480
-----------------------------------

No luck. I have no problem opening the connecting to the camera's setup webpage. And I don't have a clue what you mean by action=snapshot or user:(snapshot) or action=motionjp - where do these commands go? I see nothing in the documentation. Tried different resolutions as well. The system is working perfectly with 6 axis 207's, and I'm thinking I should have shelled out more money for axis, but I was trying to be a cheap bastard.

Thanks in advance...

[itsthemedication]

The zonet 7610 works with zoneminder using the following url:

admin:admin@192.168.0.xx

and source:

/cgi/jpg/image.cgi

Don't know why it wasn't happening before. But they are running! Forget about mjpeg - not going to happen on these cheap puppies. Give credit to this guy:

http://benstechcents.blogspot.com/2008/04/zonet-zvc7610-network-camera-review.html